This is the ONLY place to get extremely DETAILED Instructional Videos on
How To Build a Custom Harley Motorcycle Bike In A Box Kit!

NEW INSTRUCTIONAL DVD NOW IN STOCK

FROM CHOPPER ASSEMBLY VIDEOS!

• This DVD covers the installation of every single part in the BDL belt drive kit!

• We cover the special tools you will need – including a bearing press and the special tool needed to remove the transmission main shaft bearing inner race.

• Shimming and alignment of the belt pulleys so the belt sits in the correct position on the pulleys and you don’t throw the belt off!

• Shimming and alignment of the engine and transmission!

• What to do when you can’t get the belt to go onto the belt pulleys – no matter how hard you try! We teach you how to get the belt on when the engine and transmission shaft distances are too far apart!

• How many clutch bolts to use when assembling the clutch! BDL does not explain this in the instructions!

• How to get the motor plate back off if you need to remove it! They don’t tell you how to do this in the instructions and it can drive you crazy - and you can also damage the motor plate!

• How to tighten down your left rear motor mount bolt without removing the motor plate! This will save you hours of labor and fried nerves during the alignment and torquing sequence!

• How to remove the front pulley easily when you need to remove it!

• We cover all torque specs which the instructions do not cover.

• We explain the special procedures you need to follow if you are installing the belt drive on a bike that is already built!

• We show you how to adjust the clutch!

• We advise you concerning potentially serious loctite issues!